O que está aprimorando? Processo, ferramentas e resultados típicos Um tubo de cilindro hidráulico leva 12 minutosutosutos para ser afiado. Esse mesmo tubo finalizado com desbaste e polimento com rolo precisa de menos de dois minutos. Esse intervalo de tempo de 90% é o motivo pelo qual mais fabricantes estão...
O que é tubulação DOM? O processo de fabricação explicado DOM não descreve um tipo de aço. Significa Drawn Over Mandrel, um processo secundário de acabamento a frio que transforma tubos soldados por resistência elétrica (ERW) em um produto com tolerâncias mais restritas, maior resistência e uma superfície m...
Quais são as propriedades mecânicas do tubo DOM? As propriedades mecânicas definem como um tubo de aço DOM responde à carga, à deformação e ao desgaste. Para engenheiros e compradores que especificam tubos desenhados sobre mandril sob ASTM A513 Tipo 5, quatro métricas orientam 90% das decisões de seleção: r...
Precision steel tubes for shock absorber reservoirs are subjected to continuous internal pressure fluctuations and temperature changes during vehicle operation. Any deviation in inner diameter, roundness, or wall thickness directly affects oil volume stability and damping consistency. For this reason, reservoir tubes demand far tighter dimensional control than ordinary mechanical tubing.
Jiangsu Suao Metal Product Co., Ltd. specializes in high-precision cold drawn steel tubes, making dimensional stability a core manufacturing focus. With integrated cold drawing, straightening, and finishing lines, Suao ensures that reservoir tubes maintain consistent geometry throughout their full length, supporting reliable shock absorber performance in long-term service.
Cold drawn tubes for shock absorber reservoirs offer superior mechanical consistency compared to hot-rolled alternatives. The cold drawing process refines the steel grain structure, increases yield strength, and improves surface finish—key factors when tubes are exposed to repeated pressure cycles.
At Jiangsu Suao Metal Product Co., Ltd., cold drawing is combined with controlled heat treatment to balance strength and ductility. This approach allows reservoir tubes to withstand internal pressure without becoming overly brittle, reducing the risk of cracking during extreme driving conditions.
| Manufacturing Step | Contribution to Reservoir Tube Performance |
| Cold Drawing | Enhances dimensional accuracy and improves pressure-bearing capability. |
| Heat Treatment | Relieves internal stress and stabilizes mechanical properties. |
| Straightening | Ensures uniform alignment for downstream welding and assembly. |
Shock absorber reservoirs are directly exposed to hydraulic oil, making internal surface quality a critical factor. Surface defects or contamination can accelerate oil degradation and increase wear on internal components. Therefore, reservoir tubes require controlled surface roughness and strict cleanliness standards.
Jiangsu Suao Metal Product Co., Ltd. integrates finishing and surface treatment into its production workflow, allowing reservoir tubes to meet hydraulic system cleanliness expectations. These capabilities support stable damping behavior and reduce the risk of premature shock absorber failure.
Shock absorber manufacturers require consistent tube quality across large production volumes to maintain uniform vehicle performance. Variations between batches can lead to damping imbalance and increased quality risks during assembly.
With two production facilities covering over 36,000 square meters, more than 200 employees, and an annual output exceeding 50,000 tons, Jiangsu Suao Metal Product Co., Ltd. is structured to support stable, repeatable supply. Its integrated inspection and production systems help ensure that precision steel tubes for shock absorber reservoirs meet consistent standards across global automotive and industrial markets.
